Installation method for keylocking threaded insert |
-
AD-INSERT self-tapping threaded insert
- Introduction and application for self-tapping threaded inser
- The advantages of Self-tapping threaded insert
- The materials for Self-tapping threaded insert
-
specification table for self-tapping threaded insert
- Threadedinsertself-tappingwithcutting slot/imperial thread
- Threaded insert self-tappingwith cutting Slot/Metric thread
- Threaded insert self-tapping with cutting slot and head
- Threaded insert self-tapping withthree bores
- Threaded insertself-tapping/threeroundholeswithsafetypin
- Thin-walled threaded insert self-tapping with cutting slot
- Thin walled threaded insert self-tapping with3cutting bore
- Threaded insert self-tapping withhexagonalsocket/cuttingslot
- Threaded insert self-tapping with three bores/chip reservoir
- Threaded insert self-tappingwith three bores and head
- Installation recommendation（Reference）
- Installation method and attention for self-tapping threaded
- AD-INSERT keylocking threaded insert
The following is installation methods for keylocking threadedinserts:
1:Drill: The drill hole’s depth should be greater than keylocking threaded insert’s length.
2:Tapping: the tapped thread should be matched with external thread of keylocking threaded insert.
3: Install: screw insert into hole, the insert should below the surface of the workpiece.
4:Lock : press the insert’s keys into hole with special tools.
5:The state of keylocking threaded insert,after installation.(as picture)
大连安迪机械设备有限公司
紧固件部
电话:0411-86858458 Tel:+86-411-86858458
传真:0411-86859989 Fax:+86-411-86859989
网址：http://www.dlandi.com E-Mail:dlandi@dlandi.com
地址：辽宁省大连市甘井子区虹彩西园103号
机械部
电话:0411-86408898 Tel:+86-411-86408898
传真:0411-86858239 Fax:+86-411-86858239
技术支持：爱得科技辽ICP备12016963号-1