无尾螺套公制标准尺寸 |
The metric standard for tangless threaded inserts
The tangless threaded inserts in metric are made of cold-rolled 304 stainless steel wire, work-hardened to a tensile strength above 200,000 psi and a hardness of Rc 43-50. The finished surface is exceedingly smooth(8-16 inches). According to the regulation that from MA3279 to MA3281 (standard thread) and from MA3329 to MA3331 (lock thread), The tangless threaded inserts in metric were specially designed to replace the threaded inserts with tang. The tangless threaded inserts can be screw into STI screw hole according to MA1567 standard. The installed inserts are available in FED-STD-H28 standard, M section, tolerance grade 4H to 5H and ISO metric thread specifications, as well as the use for standard bolts and scrows or MJ profile bolts or screws.
The characteristics of tangless threaded inserts:
1. FOD-Free Design: No tangs to break off, retrieve or lose
2. Bi-Directional Design: No insert orientation requirements
3. Cost Reduction: Decreased installation and inspection time.
4. Quick, Non-destructive Removal: No damage to the parent material.
The metric standard sizes for tangless threaded inserts as follow:
大连安迪机械设备有限公司
紧固件部
电话:0411-86858458 Tel:+86-411-86858458
传真:0411-86859989 Fax:+86-411-86859989
网址:http://www.dlandi.com E-Mail:dlandi@dlandi.com
地址:辽宁省大连市甘井子区虹彩西园103号
机械部
电话:0411-86408898 Tel:+86-411-86408898
传真:0411-86858239 Fax:+86-411-86858239
技术支持:爱得科技辽ICP备12016963号-1