相关配套工具

The common thread insert
material:1cr18ni9(1Cr18Ni9Ti)
It is composed of the multi-turn helix of rhombic and be
capable of enhancing the screw connecting strength. It is divided
into two categories, with gutter of rupture and without gutter of
rupture. The former is used for the through hole or the blind hole
and the latter is used for the blind hole only.

the locking thread insert

material:1cr18ni9(1Cr18Ni9Ti)
It is composed of the multi-turn helix of rhombic and has more than one polygon locking ring. when the nut is screwed into the locking devices it is locking ring can lock the nut after pressure to prevent the screen joint loosening.

The special tap

Material: the high-speed steel (6542 9341).It is used to work the thread insert’ s bottom hole which is used mechanically and manually .it is divided into three categories .

the seraigh channel ,the spiral scroll and the squeezing tap.

The manual wrench Material:≤M8LY12 ≥M10 45#steel

It is used for the installment of the thread insert .

It is the basic principle that the threadinsert

is guided firstly to

force the outside diameter shrinkage to pack it into the bottom hole smoothly.The efficiently is

enhanced and the scrap rate

is reduced through using the wrench.

The electric wrench

The using range :M3~M12

It is used in the assemblage of the multitudinous thread insert or used in the

assembling the production.

The tail of break-off tool

Material:40cr

it off with a 200g hammerpunching to form it into the throng hole.It is used in breaking off the thread insert tail of the through hole, the break-off tool is aligned to the tail and breaks

Extractor

Material:the high-speed steel

Enable users to extract a thread insert fitted with defect. Thanks to it is triangular shape. the extractor can be locked into the

thread insert, by rotating the tool while keeping a vertical thrust, the thread insert can be unscrewed.

Plug GaugeMaterial:Cr Mn

It enables users to check the conformity of the tapping before insertion of

thread inserts for the

work piece for having high accuracy.

The self-locking nut

Material:35# steel

It makes the nut impossible to unscrew when the machine is vibrating, after the locking thread insert is stetted into the nut.

It is capable of removing and using time after time

Maintenance toolkit screw holes

Repair tool kit Range:M3-M64 Repair kits provide all necessary tools thread tapping or to quickly and economically repair them.