产品介绍 |
French DUBUIS grounding expansion plug screw plug and track screw
Difference between two kinds of plug pin:
Grounding plug nail is used in vehicle equipment use.
Tracks fill nail is used in track back ground and signal transmission.
Introduction:
1, DUBIS grounding plug screw
Earth Bond Hardware
Earth bond for steel and stainless plates
Grounding plug is suitable for stainless steel plate
Earth bond for aluminium plates
Grounding plug is suitable for aluminum plate
Plug pin grounding system is in electrical safety connections between structure and equipment to ensure that the won't appear when the high intensity of current through the wire short circuit of a revolutionary method.
Used in iron and stainless steel plate of the grounding plug pin:
Low tin bronze bushing
Low of 316 l stainless steel bolts
Used for aluminum plate grounding plug pin:
Low aluminum nickel plating bushing
Low of 316 l stainless steel bolts
Grounding nut:
Low and similar, by conducting bushing and the bolt with internal thread
Product features:
Suitable for carbon steel, stainless steel and aluminum plate
Low is suitable for the thickness of 1.5 mm and above board
"Unilateral actions to complete the installation
* can be installed to the blind hole
The electrical connection in the low permanent low resistance
Low in the case of damage to remove and replace
Can be used to not flat surface
Low made from corrosion resistant material
Low cost efficiency is high, because you just need to limited tools repeat installation work
When a single operation
Low independent testing
Low in RMT, Marine and military market major OEM is recommended
2, DUBIS tracks plug screw
DUBIS provides reliable connection solution, use this concept to bottom of the rail network will greatly improve. In railway nail installation, and nail the rail have no impact. As long as no vehicles through which you can use different types of drawing tools installation of various specifications of the plug. Ductility and conductivity best tin copper bush makes signal terminal electrical connection between the best and orbit.
Through the SNCF (the French national railway) certification
大连安迪机械设备有限公司
紧固件部
电话:0411-86858458 Tel:+86-411-86858458
传真:0411-86859989 Fax:+86-411-86859989
网址:http://www.dlandi.com E-Mail:dlandi@dlandi.com
地址:辽宁省大连市甘井子区虹彩西园103号
机械部
电话:0411-86408898 Tel:+86-411-86408898
传真:0411-86858239 Fax:+86-411-86858239
技术支持:爱得科技辽ICP备12016963号-1